This is Master Airscrew's
injection-molded Fiberglass-Filled 16x10 3-Blade Nylon Propellor.
This is suitable for any application from training and sport flying to
Factory-balanced 3-blade prop has NACA airfoils and holds true pitch.
They have been accurately balanced and create a greater thrust at lower
Prop is glass-filled nylon as opposed to a wooden prop.
One 16x10 Glass-Filled Nylon 3-Bladed Propeller.
Diameter: 16" Pitch: 10"
The general rule for converting a 2 blade prop to a 3 blade is subtract
1" from Diameter OR subtract 1 from the Pitch. baw
PER MASTER AIRSCREW:
All 3- and 4- blades props are balanced dynamically at the factory prior
The mounting holes are then drilled slightly off center, if required, to
properly balance the propeller.
As such, your mounting hole may be slightly off center.
Master Airscrew assures us this is perfectly normal and will not cause
any problems during usage.