produktbilde
produktbilde

Z-ENDS INKL. 30CM MIKRO SLANGE - ZAP DOSERINGSSPISSER 10PK

Varenummer: MI40PT18
Ikke på lager

  • Produktbeskrivelse
  • Spesifikasjoner
  • Anbefalt tilbehør
  • Reservedeler
  • Andre kjøpte også

Bildet viser de 2 ulike variantene som vi har av denne varen

Den "runde" har:
10 EXTENDER TIPS (RESERVE SPISSER)
12 INCHES OF MICRO-DROPPER TUBING  (30CM SLANGE TYNN)

Mens "blisterpakken" har:
10 EXTENDER TIPS (RESERVE SPISSER)

Vi sender den vi har inne for øyeblikket.

WORKS WITH ALL SIZE BOTTLES OF ZAP

Uses:
Into, under, around, or through, Z-ENDS extend the length of ZAP bottle nozzles for getting into hard-to-reach areas.
Use Z-ENDS for more precise control of glue placement and glue amount.
Since Z-ENDS are replaceable, a clogged or damaged glue tip doesn’t mean tossing out that bottle and wasting glue.
The Micro-Dropper tubing is used to deposit very small amounts of glue to the smallest of areas.
The tubing fits into the open end of either the standard bottle or Z-END.
The tubing comes standard at 12 inches long but can be cut as needed to suit your needs.

Helpful Hints
Z-ENDS fit over the standard bottle ends of all ZAP glues.
The tips of Z-ENDS can be cut back to deposit larger amounts of glue.
Sometimes glue can build up on the outside of a Z-END, let it harden and it will pop right off leaving a clean open tip.
When using the Micro-Dropper tubing let the glue wick down through to the tube end, then gently squeeze the bottle to deliver a small drop of glue.

PT-18
Z-Ends (10 Extender Tips & 12" of Micro Tubing)

  • Produsent: Pacer
  • Lengde: 0
  • Flytype: 0
  • Modelltype: Lynlim-CA-Kicker
  • Vingekapasitet: 0
  • Bakkeklaring: 0