MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive,
Easy, Clean, and When Compared to "old fashioned" Coverings, Quick To Use.
FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only .2 oz/sq ft
Dry Adhesive Activates When Heat is Applied
Shrinks to a Drum-Tight Finish As It Cools
High Gloss Finish
Fuelproof and Waterproof
Stronger and Lighter Than Traditional Silk and Dope Coverings
May be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish
One (6' x 26") Roll of Orange Covering One Instruction Sheet
REQUIRES:
Sealing Iron
Heat Gun
Iron Sock
COMMENTS:
Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May Vary Slightly In
Color Between Production Runs of These Products.
If Using Three or More Rolls of the Same Color, it is Suggested to
Use a 25' Roll To Ensure the Same Dye Lot for the Entire Model Being Covered.
LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its True Color.
MonoKote is a High Temperature Covering, NOT For Use Directly On Foam
EconoKote IS For Use Directly On Foam.
Temperature Ranges:
Attaching to Wood: 215 - 240°F (activating the glue)
Partial Shrinkage: 230 - 270°F
Maximum Shrinkage: 270 - 350°F