HANDRESTS FOR JETI DS-14,16,24

Hand rests designed for the JETI Duplex DS-14, DS-14II, DS-16, DS-16II and DS-24 handheld transmitters. Made from high-strength ASA plastic, the hand rests are UV-resistant for a long time and can withstand temperatures up to 90° Celsius.

Easy assembly

To mount the hand rests on the transmitter just remove the original hexagon socket screws from the transmitter and remove the aluminium blocks. Then the hand rests are simply aligned to the original mounting holes and screwed on.

Recommended and optional accessories

The hand rests can be used with or without the optional JETI suspension bracket 80001515. When used without the suspension bracket the original mounting screws are used by the transmitter. In addition it is recommended to use the JETI shoulder strap 80001533.

If the optional suspension brackets are used the new M4x12 screws included in the scope of delivery must be used to attach brackets and hand rests. It is then recommended to use the Jeti cross belt 80001511 or the double shoulder strap 80001532.

The transmitter fits into the JETI transmitter case with the mounted hand rests. The original foam does not have to be removed or cut out of the case.

Delivery contents

1 hand rest right side, 1 hand rest left side and 4 hexagon socket countersunk screws M4x12.

Note: Please avoid holding or carrying the transmitter directly on the hand rests, as these could break under unfavorable circumstances.