Crack „PITTS“
The new Crack ,,PITTS" EPP range are top and bottom printed 3D foamies with a 31.5"/800mm wingspan designed for 60-80W brushless motors and 3 servos.
Each RC Factory Crack Pitts is produced entirely from EPP and has a target flying weight of 180-200g (5.64-7.05oz). The 31.5"/800m wing is not profiled. These models are designed to be built quickly and do not have an undercarriage although anundercarriage is available separately.
Recommended equipment (not included):
motor: AT2206-14/ 1500KV, 25gtory.eu/detail.php?id=405
speed controller: ESC12A w/BEC, 12g
servo: 2 x 5 g (HXT500), 1x 9 g (D 90 Gening)
battery: 320 - 450 2S (25C)
propeller: 9/5
Wingspan: 800mm
Weight: 180gr
Number of controlled components: 4
Suitable power unit: 60-80W (25-35gr)
Battery: 2S LiPo 320-450mAh
Crack „PITTS“
The new Crack ,,PITTS" EPP range are top and bottom printed 3D foamies with a 31.5"/800mm wingspan designed for 60-80W brushless motors and 3 servos.
Each RC Factory Crack Pitts is produced entirely from EPP and has a target flying weight of 180-200g (5.64-7.05oz). The 31.5"/800m wing is not profiled. These models are designed to be built quickly and do not have an undercarriage although anundercarriage is available separately.
Recommended equipment (not included):
motor: AT2206-14/ 1500KV, 25gtory.eu/detail.php?id=405
speed controller: ESC12A w/BEC, 12g
servo: 2 x 5 g (HXT500), 1x 9 g (D 90 Gening)
battery: 320 - 450 2S (25C)
propeller: 9/5
Wingspan: 800mm
Weight: 180gr
Number of controlled components: 4
Suitable power unit: 60-80W (25-35gr)
Battery: 2S LiPo 320-450mAh