O.S. .35AX ABL
med E-3080 Muffler.
Ideally suited to
a variety of R/C aircraft including trainer, sport types.
FEATURES:
Same mounting
dimensions as the O.S. .32SX and .25FX Weighs only 0.35oz (10g) more than the
.32SX Advanced Bi-Metallic Liner. This process uses a double layer of plating
material rather than one thick layer. This helps the metal to bond to the
cylinder and is more durable. Also, the plating process is more consistent,
resulting in a more precise fit between piston and sleeve for better compression,
longer life. Newly designed E-3080 Power Box muffler generates mild and pleasant
sound and is constructed with an O-ring between the front and rear body to
prevent oil leaking and is fully positionable 21K carburetor with needle valve
angled toward rear of engine for safer adjustments Ball bearing-supported
crankshaft Two-year limited warranty
INCLUDES:
One O.S. Max .35AX
ABL BB model airplane engine with muffler, #8 glow plug, two 3x28mm cap head
muffler screws, needle valve extension cable, warranty sheet, decal sheet and
illustrated instruction manual
REQUIRES:
Fuel containing
5%-20% nitromethane with at least 16% lubricant
SPECS:
Displacement:
0.352 cu in (5.77cc)
Bore: 0.795"
(20.2mm)
Stroke: 0.709"
(18.0mm)
Practical RPM:
2,500-17,000 Output: 1.3 ps @ 16,000 Weight: 12.8oz (363g) with muffler
Recommended
Propellers: 10x6, 10x7, 11x6, 12x6 (10x6 for break-in) Crankshaft Size: 1/4-28
Distance from
center of engine to drive hub: 2.1" (53mm)
Distance from
center of engine to end of crankshaft: 3.1" (77mm)
Distance/crankshaft
center to muffler exhaust outlet: 3.8" (96.2mm)
Height from
crankcase bottom to top of cylinder head: 3.02" (76.9mm)
Height/mounting
tab to top of cylinder head: 2.4" (61.5mm)
Width including
mounting tabs: 1.8" (45mm)
Crankcase width
below mounting tabs: 1.2" (30.6mm)
Width between
mounting holes same side: 0.59" (15mm)
Width between
mounting holes opposite side: 1.5" (38mm)
Diameter of
muffler body: 1.2" (32mm)
Needle Settings:
High Speed: 2 turns out from fully closed Low Speed: Flush with carb body then
1/2 turn in