Mini scale Retractable Tailwheel for .15 - .45 size planes.
It is made of durable nylon and may be operated by either a
servo or pneumatically, features a spring center, and is steerable.
Includes a pre-bent wire axle but does not include a tailwheel.
Can be floor or bulkhead mounted.
If operating pneumatically, customer must purchase:
Air tubing, Air cylinder and T-connectors
(to hook up with the main gear retract air system)
If operating mechanically, customer must purchase:
Pushrod
Retract servo
(standard servo may be used, but will operate too quickly)
With either set-up, a pushrod is also needed for steering.
Specs:
Height (without wire axle): 1.19"
Width: 1.0"
Length: 1.375"
Bulkhead mount dimensions: 1" wide x .563" tall
Floor mount dimensions: 1" wide x .75" long
May use tailwheel up to 1" in diameter.